ocxo raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a . phone: +001(305) 593-6033 fax: +001(305)594-3973 e-mail: sales@raltron.com internet: http:/www.raltron.com ocxo series 9400 features applications excellent frequency stability - telecom high frequency up to 100mhz - base station low profile - instrumentation electrical performance parameter ocxo series 9400 at cut crystal sc cut crystal supply voltage, nom. 12v, 5v,3.3v 5% standard power dissipation steady state 2 watt max. heat up power 5 watt max. heat up time. 5 min max frequency range 10 to 100mhz standard frequency adjustment: electrical (0 to 5v) electrical (0 to 10v) 10ppm min 15ppm min 0.7ppm min 1ppm min 0.05 ppm 0.15 ppm 0.010 ppm 0.020 ppm freq. stability vs. temperature lx: 0c to 60c fz: -30c to 70c (standard, contact factory for different temp ranges and stabilities) freq. stability vs. supply changes 0.01 ppm max for 5% change 0.005 ppm max for 5% change freq. stability vs. load changes 0.005 ppm max for 5% change 0.002 ppm max for 5% change long term stability (aging) 0.5 ppm max for 1 years 0.005 ppm/day max. 0.1 ppm max for 1 years 0.002 ppm/day max. output hcmos/ttl/sine 0 to +10dbm harmonics, sub harmonics -30dbc(sine output) spurious -75dbc(sine output) duty cycle 40/60% to 60/40%(hcmos) rise / fall time 10ns max. (hcmos,10%~90%vout, 90%~10%vout) short term stability (10mhz) 1 e-10 /sec 5 e-11 /sec phase noise typical under static conditions (sine output 10mhz) offset phase noise 10hz -95 dbc/hz 100hz -125 dbc/hz 1000hz -135 dbc/hz 10000hz -150 dbc/hz offset phase noise 10hz -115 dbc/hz 100hz -135 dbc/hz 1000hz -145 dbc/hz 10000hz -150 dbc/hz note: all typical parameters for a 10mhz output and 5v supply, for different frequencies consult factory
ocxo raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a . phone: +001(305) 593-6033 fax: +001(305)594-3973 e-mail: sales@raltron.com internet: http:/www.raltron.com how to order (part number) prefix output type cut type series revision temperature range stability frequency supply voltage ox 1:ttl 2:hcmos 3:acmos 4:lvcmos 6:sine 0:at (no vcontrol ) 1: sc (no vcontrol ) 4: at (elect vcontrol) 5: sc (elect vcontrol) 94: 9400 a first letter lowest temperature, second letter highest temperature: from a=-55c to z=+70c, then: 1=+75c, 2=+80c, 3=+85c? in 5c steps example: lz: +0c to +70c lx: +0c to +60c fz: -30c to +70c d3: -40c to +85c value x 10e-2 in ppm example 28= 0.28ppm 10= 0.1ppm in mhz 3.3; 3.3v 5: 5.0v 12; 12v example : ox6494a-lz-10-100.000-12 frequency 100 mhz temp stability = 10 x 10e-2 = 0.1 ppm operating temp range = 0c to +70c revision "a" series 9400 at cut crystal, electrical frequency control output sine wave prefix: ocxo vcc=12vdc mechanical specification height, max. ?h?: 0.53? / 13.5 mm outline tolerance: 0.015? / 0.4mm pin functions: [1] case / ground [2] supply voltage [3] rf output [4] control voltage note: denotes pin 1 location
|
